PlugPhones

PlugPhones motorcycle ear plug speakers

Earphone System for Motorcyclists

	Filter earplug speaker system
	Remain aware of road traffic noise
	Low-frequency balance system
	Attenuates ambient noise by 20dB*
	Generic fit “one-size-fits-all”
	High level of comfort

The earphone system will attenuate ambient noise by up to 20dB with a very high level of comfort - even under close fitting helmets. For integration into a starcom system we supply full face and open face headsets to provide the microphone and starcom connection with a socket to connect the PlugPhones into the system.

Part number PP-10 (PlugPhones with stereo 3.5mm jack plug)

Part number PP-14 (PP-10 including PP-04 StarCom1 full face helmet kit with bud mic and stereo jack socket to accept PlugPhones and HSEX-01)

Part number PP-16 (PP-10 including PP-06 StarCom1 open face helmet kit with boom mic and stereo jack socket to accept PlugPhones and HSEX-01)

For pricing please see price lists >>

Tecstar PlugPhones are designed to combine a high-quality, acoustically compensated ear speaker with a generic ear plug for use on motorcycle sound systems. Two types of ear-tips are included. To compensate for differences of ear volume, low-frequency compensation filters have been designed to provide the optimum bass response. Four different sizes are supplied and should be selected empirically on the basis of personal preference.

Multifilament eartips that provide an exceptional fit, especially in ear canals with complex shapes. Made from Thermoplastic Elastomer these eartips will also address problems that may be associated with “mobile ear canals” a condition that afflicts individuals where the ear canal moves with jaw movement or when a crash helmet is worn.

2x Included with the PP kits

Specifications

Driver: Closed dynamic 10mm Mylar Film

Power Handling: 20mW

Sensitivity: 95+/-3dB @ 1mW

Impedance: 32 Ohms @ 1kHz

Response: 100Hz – 15kHz +/- 3dB (into 2cc coupler)

Cable Length: 1.2M

Connector: 3.5MM gold-plated stereo

Weight: 11 g

Ambient attenuation: Better that 20dB when Plugphones are fitted correctly

Triple Flange Silicon Ear tips for use with Plugphones and many other propriety ear pugs and monitors

2x Included with the PP kits

Formable Foam Eartips

Optional. Note included in the standard kits.

Using the PlugPhones

Place the foam (or silicon) inserts on each of the drivers by sliding it onto the acoustic tube as far as it will go. You will probably need to cut them to obtain the optimum fit – do this in very small increments.

Insert the smallest LF compensation filter of the same size into the hole at the back of each driver. These are moulded onto the translucent tree of small parts that come with you PlugPhones. Be careful – these are very small.

If you feel that you would like more low-frequency – replace the compensation filter with the next size up.

PlugPhone low-frequency Compensation Filters with 4 graduation levels.

These are used to adjust the low frequency characteristics of the Plugphones and the amount of outside sound you hear so you remain aware of road traffic noise