|
Crystal clear
motorcycle communication at
100mph+ |
Currently being translated! |
Italian |
|
Tecstar Electronics designs and
manufactures a complete range of crash helmet/ motorcycle communication
intercom equipment. Our
development is providing the most comprehensive motorbike
communication product range available
world wide and is
setting new standards in performance and value for money for the
bike communication market. The company goal is to produce the
best motorcycle communications systems in the world. Hundreds of
our users agree we have achieved this goal.
You can't buy better, that's our guarantee!
Universal motorcycle helmet
intercoms allows bike to bike, rider to passenger, mobile phone, stereo
music, sat navigation, radar etc all at once.
|
|
Sole Rider
Simply plug in and go!
Listen to stereo
music, cell phone, sat nav, radar etc... |
 |
High quality stereo music, even
through earplugs |
  |
|
Rider to
Pillion The best
motorcycle intercom
With a passenger, at any speed, enjoy clear two-way conversation. |
|
Satellite navigation and radar
input |
| Rider to Rider
High speed bike-to-bike communication.
Talk to another bike or even car, the universal motorcycle intercom. |
 |
Using a
phone; even at high speed;
your caller probably won't be aware you’re on a bike. |
|
 |
Rider to passenger: Easy conversation even at high speed. No buttons
to press; Just talk normally! |
 |
|
 |
Talk Bike to
Bike, with a two-way radio you can us VOX or PTT to communicate with another
bike or Car. |
 | Simple to buy. |
| Simple to Fit. |
| Simple to use. |
|
The selection of
the StarCom system starts by selecting between KIT A, B C, D or F. Each kit
contains the StarCom1, stereo music lead, fitting kit, dc power cable and
fitting and 1 or 2 headsets etc. To expand the system, just add the
accessories you require for your complete configuration. The example given
provide a complete solution, everything you need is there. |
 |
StarCom1
Kit-A
Sole rider: this includes
all that's required for a sole rider system. Simple, that's it. This includes
starcom and fitting kit, plus 1 helmet kit all the cables, DC lead and fitting
kit to power the unit from the bike and even a music lead.
StarCom1 Kit-B
Rider pillion: this
includes all that's required for a rider pillion system. Simple, that's it. This
includes starcom and fitting kit, plus 2 helmet kits all the cables, DC lead and
fitting kit to power the unit from the bike and even a music lead.
StarCom1 Kit-C/D/F
Bike to Bike: these
include all that's required for a bike system to communicate with another bike
system. Simple, that's it. This includes starcom and fitting kit, a two-way
radio and cable, PTT (push to talk switch) plus 1 helmet kits all the
cables, DC lead and fitting kit to power the unit from the bike and even a music
lead.
|
|
|
|
|
|
|
To add a mobile/cell phone just add a phone adaptor kit see
PHO-01 to any kit. To add a radar or sat nav system is just a case of plugging
in, starcom1 requires a 3.5mm jack plug input. We supply a range of mobile phone adaptors, please specify you
phone model number.
|
|
|
Easy to operate: Designed to
provide simple hands free communication. When installing set up the volume, VOX
and balance, then each time you used the system; plug in Headset1 to turn ON and
unplug to turn OFF. The intelligent active volume adjustment system takes care
of the volume and, along with VOX (voice operation transmit) and music mute
system - it’s all hands free.
|
|
|
|
|
|
| Easy to install:
Designed to be easily mounted on a Bike, supplied complete with a Velcro disc
and tie wrap mounting kit, a typical installation is the unit fixed under the
seat. The unit can be battery operated or powered from a 12V DC vehicle supply
again a typical installation will pick up the 12V power very easily and
conveniently from the rear light.
|
|
|
|
|
|
 |
The
helmet kit assembly: consists of two slim
speakers and a microphone which are Velcro attached into position, one speaker
adjacent to each ear and the bud microphone in front of the mouth (a boom mic in
the open face helmet kit). For flip helmets our bud microphones work
extremely well, with the microphone secured in the chin guard when the flip is
dropped the mic is automatically in the perfect position, with boom mics it is
often necessary to adjust the position which is difficult and dangerous while
riding.
|
|
|
|
|
|
|
All other web
pages on this site are only available in English at this time! |
|
|
|
|
|
