|
Bike Make Model |
Yamaha Fazer FZ6 |
|
|
Bike Year and spec |
2003-on UK
spec |
|
|
|
|
System installed |
StarCom1
Kit-B |
|
|
|
| |
|
|
|
|
StarCom1 unit positioning and fixing |
|
|
|
click to enlarge
|
StarCom1 fits very
easily under the Fazer seat.
Remove seat, StarCom1 will
fit perfectly next to the tool kit, there is a rubber strap (not shown in
picture) to secure StarCom1.
|
| |
|
|
|
|
|
Power pick-up and wiring |
|
|
|
click to enlarge
|
Power can easily be
picked-up from the rear light.
Connect the Starcom1 Red
fused wire to the rear light BLUE wire, using crimp connector supplied.
Connect the Starcom1 Black
wire to the rear light BLACK wire, using crimp connector supplied.
|
| |
|
|
|
|
|
Headset connections |
|
|
|
|
click to enlarge
|
Using the Standard headset cable
fittings:
The coiled headset
extension lead is plugged into StarCom1 then secured to the bike allowing
just enough cable length to connect to the crash helmet, when not being
used it plugs into the retention cap. The weather proof retention caps can
be placed close to the seat easily accessible by the rider and at the rear
of the seat for the pillion headset, the caps are positioned to ensure the
cable is secured to the bike and there is no slack when not being used.
|
click to enlarge
|
Using the optional bulkhead fittings
and bike frame mount bracket.
Using 2 x HSEX-04 bulkhead
extension leads and the fitting bracket, the system can be fitted as
shown. The headset coiled extension leads stay with the helmets.
|
| |
|
|
|
|