|
StarCom1 headsets
Note:
The
StarCom helmet headsets are designed and built in the UK to a very high
specification,
these are not available from any other source. Standard kits consists
of two low profile speakers and an anti-vibration noise cancelling directional microphone.
StarCom1 helmet kits |
|
Full Face
Helmets |
 |
Flip Front
Helmets |
 |
Open Face
Helmets |
 |
Sortie or No
Helmets |
 |
|
SH-004
Standard full face helmet kit with bud microphone and stereo slim
helmet speakers. Details>> |
SH-004 or SH-006
click for details |
SH-006
Standard Open face helmet kit with boom microphone and stereo slim
helmet speakers. Details>> |
PRO-001
Standard ear fit with boom microphone, single/mono ear fit speaker. |
|
or |
or |
or |
or |
|
PP-04
Full face helmet kit with bud
microphone and connector to accept in ear stereo speakers, Customer
supplied custom earplug speakers or StarCom1 PP-10 plug phones
Details>> |
PP-04 or PP-06 |
PP-06
Open face helmet kit with boom
microphone and connector to accept in ear stereo speakers, Customer
supplied custom earplug speakers or StarCom1 PP-10 plug phones
Details>> |
PRO-002
Stereo ear fit kit with boom microphone, left and right ear plug
speaker units. |
|
or |
or |
or |
|
|
PP-24
Full face helmet kit with bud
microphone, stereo slim helmet speakers, and connector to accept in
ear stereo speakers, Customer supplied custom earplug speakers
or StarCom1 PP-10 plug phones Details>> |
PP-44 or PP-26 |
PP-26 Open
face helmet kit with boom microphone, stereo slim helmet speakers, and
connector to accept in ear stereo speakers, Customer supplied custom
earplug speakers or StarCom1 PP-10 plug phones
Details>> |
|
StarCom1 helmet kits |
|
The
Speakers are designed for easy fitting into a helmet, they are mounted within a
slim line plastic baffle and then in a comfort fit padded mounting disks with a
Velcro stick pad. The speakers have a high specification audio response
providing both excellent music quality sound and crystal clear speech. The microphones are the most important part of a helmet system,
the StarCom
microphones are virtually immune to background noise, wind noise and
mechanical vibration. |
|
|
|
|
Student
Headset
|
Ear PlugPhones PP-10
Ear plug speakers
designed for ear protection, quick fit and comfort. |
Crew Headset SH-010
Ear defender based head-set
with boom microphone. |
Goldwing headset
Harley headsets
|
|
|
For application specific and special
requirements please call our sales team. |
|
Headset Connectors |
 |
The headset connectors are mini din shrouded
plugs and sockets, these provide a light weight, weather proof connection with a
safety quick release action. The plugs and sockets have a large easily seen
location silver on black arrow to make connection easy. |
|
Headset Speakers |
|
The Speakers used for all Tecstar headsets are no
ordinary speakers, the speaker itself is special providing a class leading
frequency response, power output and compact size. This results in a comfortable
fit helmet speaker that provides an impressive bass response making for
excellent stereo audio quality and clear and natural speech. The output power
allows for loud music and speech through ear plugs and the helmet lining.
Dimensions: Speaker unit: dia=30mm depth=7mm. Cover dia=60mm total depth=8mm
|
 |
The
speaker can be fitted in a number of ways to best suit your helmet. The Velcro
pad can be stuck to the helmet lining, the speaker cover can velcored directly
to the helmet lining, the speaker and cover can be positioned behind the lining
or the speaker alone can be positioned inside or behind the lining. Some helmets
have recesses, which the cover can be pressed in, some have pockets to fit
speakers. |
|
Headset Microphones |
|
SH-006 Boom Mic
|
The microphone is critical to the performance of
a helmet system, it must only pick up speech directly in front and close to it.
The potential high levels of background noise, wind noise and vibration can make
speech impossible if the microphone were to pick up these noises. The Tecstar
microphone has been carefully designed to be virtually immune to vibration and
virtually deaf to wind and background noises. The microphone design is common to
SH-004, SH-006 and SH-010 head sets. Even used totally unprotected with open
face helmets and no fairing communication is perfectly possible at very high
speeds. The SH-004 kits has a dome mic which is fix with a velcro disc
into the chin guard of the helmet directly in front of the mouth. The SH-006 and
SH-010 kits have the mic on a stiff boom allowing the position to be adjusted
again to directly in front of the users mouth. |
|
Flip front Helmets
|
|
The choice of headset for a flip front helmet is dependant on
your requirements either SH-004 or SH-006 are suitable with the following
considerations:
Flip
Front using SH-004:
Pros: The
microphone will be positioned precisely when the front is flipped down, every
time. When the flip is lifted the microphone is also moved away from your mouth.
Cons: The
microphone cannot be used while the helmet front is lifted. The microphone
wiring needs to be fitted around the flip hinge.
Flip
Front using SH-006:
Pros:
The microphone can be used while the helmet front is lifted. Wiring is simple.
Cons: The
microphone boom may be knocked when closing the helmet flip and may need to be
adjusted each time.
Either
headset will perform extremely well with flip helmets, the choice if mostly of
practicality. To date around 75% of customers have chosen the SH-004, we offer a free
exchange if you encounter problems fitting or are unhappy with your choice. (
Free exchange is valid only for headsets that have not been used, the offer
does not cover postage costs and is valid for 10 days from receipt of order)
|
|
Full Face Headset SH-004
Suitable for all
makes of full face helmets, easy fit with a Velcro fix microphone. |
  |
The SH-004 kits has a dome mic which is fixed with a velcro
disc into the chin guard of the helmet directly in front of the mouth. The
headset is supplied with stereo speakers.
The speaker can be fitted in a
number of ways to best suit your helmet. The Velcro pad can be stuck to the
helmet lining, the speaker cover can velcored directly to the helmet lining, the
speaker and cover can be positioned behind the lining or the speaker alone can
be positioned inside or behind the lining. Some helmets have recesses, which the
cover can be pressed in, some have pockets to fit speakers. |
|
Open Face Headset SH-006
Suits full & open face
helmets. The boom microphone is designed to fix inside the helmet lining |
|
Designed to be used with open face helmets, the speakers are
the same as the Full Face set. The boom is a strong bend and stay
construction with a simple mounting, a flat rubber spade end to the mic
which is pushed behind the helmet lining to provide a simple and sturdy fit. |
  |
|
PP-04
Full face helmet kit with bud microphone and connector to accept in ear
stereo speakers, Customer supplied or StarCom1 PP-10 plug phones
This headset is like our SH-004 except the speakers have been replaced with
a stereo jack socket to allow earplug speakers to be used with our kits.
N.B. This incorporates an interface circuit to convert the StarCom1 high
level drive to a suitable signal for ear plug speakers. |
 |
PP-06
Open face helmet kit with boom microphone and connector to accept in ear
stereo speakers, Customer supplied or StarCom1 PP-10 plug phones
This headset is like our SH-006 except the speakers have been replaced with
a stereo jack socket to allow earplug speakers to be used with our kits.
N.B. This incorporates an interface circuit to convert the StarCom1 high
level drive to a suitable signal for ear plug speakers. |
 |
PP-24
Full face helmet kit with bud microphone, stereo slim helmet speakers,
and connector to accept in ear stereo speakers, Customer supplied
or StarCom1 PP-10 plug phonesThis headset is like our SH-004
except along with speakers there is also a stereo jack socket to allow
earplug speakers to be used with our kits.
N.B. This incorporates an interface circuit to convert the StarCom1 high
level drive to a suitable signal for ear plug speakers. |
|
PP-26
Open face helmet kit with boom microphone, stereo slim helmet speakers,
and connector to accept in ear stereo speakers, Customer supplied or
StarCom1 PP-10 plug phonesThis headset is like our SH-006 except
along with speakers there is also a stereo jack socket to allow earplug
speakers to be used with our kits.
N.B. This incorporates an interface circuit to convert the StarCom1 high
level drive to a suitable signal for ear plug speakers. |
|
PlugPhones
Ear Plug Speakers
PP-10
 |
Filter earplug speaker system |
|
Remain aware of road traffic
noise |
|
Low-frequency balance system |
|
Attenuates ambient noise by
20dB* |
|
Generic fit
“one-size-fits-all” |
|
High level of comfort |
|
 Tecstar PlugPhones
are designed to combine a high-quality, acoustically compensated ear speaker
with a generic ear plug for use on motorcycle sound
systems. Two types of ear-tips are included. To compensate for differences
of ear volume, low-frequency compensation filters have been designed to
provide the optimum bass response. Four different
sizes are supplied and should be selected empirically on the basis of
personal preference.
PP-16 Open face mic. PP-14 Full
face mic |
Specifications
Driver: Closed dynamic 10mm Mylar film
Power Handling: 20mW
Sensitivity: 95dB +/-3dB @ 1mW
Impedance: 32 Ohms @ 1kHz
Cable Length: 1.2M
Connector: 3.5mm gold-plated stereo
Weight: 11g
Ambient attenuation: Better that 20dB when fitted correctly
Response: 100Hz - 15kHz +/- 3dB (into 2cc coupler) |
|
|
|
|
|
Student Headset SH-007 & SH-008
|
 |
The
student headset consists of a single speaker which can be easily and
quickly fitted in a number of ways to best suit the helmet. The Velcro pad
can be stuck to the helmet lining, the speaker cover can be velcored
directly to the helmet. Some helmets have recesses, which the cover can be
pressed in, some have pockets to fit speakers.
Designed for training school
use, the student headset is a fast easy fit single speaker headset. Allowing
a student to quickly fit a radio system for listen only training
applications.
The SH-007
is the Student Helmet Set for cobra, Icom, Alan
radios etc. while the SH-008 is for Kenwood radios
|
|
Crew
HeadSet SH-010 |
 |
The crew headset is designed for a variety
of uses including pit lane crews, open top cars, trikes etc. It is based
around a lightweight ear defender designed for outdoor use, it provides 30dB
noise protection at 1kHz.
The speakers are the same as the Full Face set. The boom is a
strong bend and stay construction. Two levels of wind protection are provided,
the standard foam will protect the microphone from moderate
wind and noise levels while the
secondary foam will give the ultimate protection for high noise
applications. |
 |
| If
you own a Honda Goldwing, Honda ST1100, Honda ST1300, BMW, Yamaha, Kawasaki
or Harley tourer already equipped with an intercom, then our headsets are
second to none! The headsets are developed from the StarCom1 system, we
guarantee the performance and quality is beyond that offered by the
manufactures.The headsets incorporate noise reducing dynamic
microphones and high quality stereo speakers giving CD quality sound with
fantastic bass responce. These units plug directly into most manufacturer's
(OEM) communication systems with 5pin Din sockets. The headsets are
available in full-face or open-face configurations. |
|
Goldwing Headsets |
Goldwing headsets are now available, they
plug directly into the Goldwing audio system 5pin DIN Socket, please contact
our sales desk for further details |
|
|
Harley-Davidson |
Harley-Davidson headsets are now available, they
plug directly into the Harley audio system 5pin DIN Socket, please contact
our sales desk for further details |
NEW |
| Main
page link: www.tecstar.co.uk
www.starcom1.com |
|
