StarCom1 Motorcycle Intercom & Communication System
Designed to BSI EN10950-1
Designed to be the best you can buy
Tecstar Electronics Ltd - Designers and manufacturers

 ►Home І ►StarCom1 & Advance І ►Accessories & Price lists  І ►Brochure  І ►Testimonials І ►Buying Guide & Order On-Line  

 ► Contact us   І  Tel: +44(0)1480 399499

 ► Products...  І  ►What's News І ►Track demo 100mph  І ►Tested against competition  І ►FAQ's І ►Headsets І ►Site map 

BKT-01

BulkHead fixing Bracket
The BKT-01 mounting bracket allows the:
2 x HSEX-04 and/or the HSEX-05  (not included)
1 x EXT-01 (not included)
bulkhead headset cables to be fixed to the bike frame in a suitable position, without the requirement of cutting a mount hole.

See ProFit-01 for complete kit.

Fixing instructions

The bracket should be fixed to a convenient position on the bike frame  (section 20-25mm diameter). Place the P-clip around the selected frame section, place the plate in front  and push the bolt through the plate and p-clip, place the washer onto the bolt then the shake-proof washer and then the nut, tighten nut, ensure the plate is square and then fully tighten. Mount the bulkhead connectors and secure with hex nut.

 

Copyright © 2005 Tecstar Electronics Ltd. All rights reserved. - Designers and manufacturers

Useful Links    Site Map   Contact us  Order On-line

Page links:  helmet intercom  Starcom1  Motorcycle intercom, Motorbike communications  bike to bike intercom  helmet communication