|
BT-GO
motorcycle bluetooth headset system
Note: The BT-GO is not
currently available for the USA |
|
General
BT-GO is stand alone helmet system it can NOT be used with a
StarCom1, Advance or DIGITAL
The BT-GO can connect up to 4 bluetooth devices
one of which can be a second BT-GO, only 1 device can be active at a
time, some switching between devices is automatic for example when
working as a intercom and a phone call occurs BT-GO will automatically
switch to the phone for the duration of the call and then back to the
intercom once the call is terminated. BT-GO provides for press button
control of source switching but this must not be used while on the
move. Source switching is dependant on the bluetooth device having
this feature.
|
BT-GO-04 £140
BT-GO system with a full face headset
BT-GO-06 £140
BT-GO system with a open face headset.
 |
|
Range:
|
Typically 150meters in most
conditions |
|
Connects to:
|
Sat Nav, Cell Phones |
|
Stereo:
|
Listen to stereo MP3 music
from an A2DP enabled audio device |
|
Two BT-GOs:
|
Provide Rider to Passenger or
Bike to Bike |
|
Operating time:
|
7hours typically with music,
up to 20hours speech only. |
Connectivity
Rider to Passenger
With 2x BT GO
kit’s full duplex rider to passenger intercom conversation is
provided. In this
configuration both Rider and Passenger can have their bluetooth mobile
phones connected. When a phone call occurs the phone will auto answer
(if phone has auto answer) and the bluetooth connection will switch
to the phone, when the call is terminated the bluetooth connection
will revert to rider passenger intercom.
Bike to Bike
With 2x BT GO
kit’s full duplex bike to bike (rider to rider) intercom conversation
is provided. The working range is typically 150m.In this
configuration both Rider and Passenger can have their bluetooth mobile
phones connected. When a phone call occurs the phone will auto answer
(if phone has auto answer) and the bluetooth connection will switch to
the phone, when the call is terminated the bluetooth connection will
revert to rider passenger intercom
Sole Rider
As a sole rider
the BT GO will connect to:
Mobile
Phone;
if your phone is bluetooth enabled, if the phone has music and or GPS
available via bluetooth then these feature will also be active through
the BT GO
or
MP3;
BT GO is A2DP enabled and will connect to a MP3 stereo music device
and allow great quality stereo music to be played on the move.
or
Sat Nav;
Connect to a bluetooth enabled GPS and have voice commands via
bluetooth and if the GPS system includes MP3 and a Phone connection
then these feature will work through BT GO.
General
The BT
GO can connect up to 4 bluetooth devices one of which can be a second
BT GO, only 1 device can be active at a time, some switching between
devices is automatic for example when working as a intercom and a
phone call occurs BT GO will automatically switch to the phone for the
duration of the call and then back to the intercom once the call is
terminated. BT GO provides for press button control of source
switching but this must not be used while on the move. Source
switching is dependant on the bluetooth device having this feature
|
|
BT-GO
helmet mounting____________________________________________________________________________________________________________ |
| |
|
Adhesive Mount
1)Find the best position
to fix the mount plate on the left side of the crash helmet.
Ensure the fixing area is clean and dry.
2) Remove the adhesive
backing and firmly press the mounting plate into position.
3) Insert the BT-GO unit into the bracket and
then push left and then down to the lock position. The BT-GO can
then be easily inserted and removed as required.
|
|
| |
|
Plastic Screw Mount
1)
Find a suitable
position and push plastic plate between helmet shell and lining
2) Fit the fitting plate and secure with 2 screws.
3) Insert the BT-GO unit into the
bracket and then push left and then down to the lock position. The
BT-GO can then be easily inserted and removed as required.
|
|
 |
 |
 |
| |
 |
 |
|
| |
|
|
Specification
__________________________________________________________________________________________________________________________
Audio output power: Max1/4
Watt into each headset speaker
Operating Range: better than 150M in
most conditions
Power supply: 3.7V DC 500mAh internal
rechargeable
Visual indication: Front panel LEDs,
Power
consumption:
Intercom operation: 60mA typical
Operating time: 7 Hours typical
Dimensions: (WxHxD)
90x35x25mm (2 3/4” x 3/4 ” x 1/2”)
Weight: Approx 50g
Operating temp: -10 to +55ºC
______________________________________________________________________________________________________________________________________ |
| |
| |
| |
| |
